BuildHere

RA2 zoning in Port Coquitlam: what can you build?

Residential Apartment 2

On a standard lot with a rear lane, RA2 allows about 5 units on a 33 × 122 ft lot (apartment); about 12 units on a 50 × 122 ft lot (apartment); about 18 units on a 66 × 122 ft lot (apartment). These figures come from running BuildHere’s engine on each lot size with the Port Coquitlam rules for this zone.

Most units by lot size

Lot (with lane)Most unitsBuilding formMax floor area
33 × 122 ft4,026 sq ftAbout 5 unitsApartment10,065 sq ft
50 × 122 ft6,100 sq ftAbout 12 unitsApartment15,250 sq ft
66 × 122 ft8,052 sq ftAbout 18 unitsApartment20,130 sq ft

Building options on a 33 × 122 ft lot

OptionStatusUnitsMax floor area
ApartmentAllowedAbout 510,065 sq ft

Size limits for apartment on a 33 × 122 ft lot

Max floor area (FSR 2.50)10,065 sq ftPOCO RA2 s.Table 2.4, notes 11 to 13
Max height98.4 ft, about 9 storeysPOCO RA2 s.Table 2.4
Site coverage60% of sitePOCO RA2 s.Table 2.4
Front setback13.1 ftPOCO RA2 s.Table 2.4
Side setback9.8 ftPOCO RA2 s.Table 2.4
Rear setback24.6 ftPOCO RA2 s.Table 2.4
Rough building footprintup to 1,119 sq ftEstimate, not a design
Parking stalls required7 stalls (minimum)POCO s.8

Source: City of Port Coquitlam Zoning Bylaw, 2008, No. 3630, Section II, Part 2 (Residential Zones: Tables 2.2, 2.3, 2.4 and Section 2.5), Current consolidated bylaw on portcoquitlam.ca, as amended through the small-scale multi-unit housing amendments (2024) and later consolidation (rules approved 2026-10-19)

Your lot will differ.

Frontage, depth, lane access, corner lots and frequent-transit areas all change the answer. Search your address for a report on the real lot in Port Coquitlam.

Check your address →orfind it on the map →

Common questions

How many units can I build in RA2 zoning in Port Coquitlam?

With a rear lane and outside a frequent-transit area, RA2 allows about 5 units on a 33 × 122 ft lot (apartment); about 12 units on a 50 × 122 ft lot (apartment); about 18 units on a 66 × 122 ft lot (apartment). Your own lot's frontage, depth and location change the result.

What is FSR?

Floor space ratio (FSR) is a building’s total floor area divided by the lot area. An FSR of 1.0 on a 4,026 sq ft lot allows about 4,026 sq ft of floor area across all storeys. Some bylaws, such as Burnaby’s R1, set no FSR at all; there BuildHere shows an effective FSR worked out from the height, setback and lot coverage limits.

Where do these RA2 rules come from?

From City of Port Coquitlam Zoning Bylaw, 2008, No. 3630, Section II, Part 2 (Residential Zones: Tables 2.2, 2.3, 2.4 and Section 2.5), Current consolidated bylaw on portcoquitlam.ca, as amended through the small-scale multi-unit housing amendments (2024) and later consolidation (rules approved 2026-10-19). Preliminary screening only. Verify with the City of Port Coquitlam.

Other Port Coquitlam zones

RS1RS2RS3RS4RTh1RTh2RTh3RTh4RRhRA1