MR6 zoning in Surrey: what can you build?
Low-Rise (4 storey) Apartment
On a standard lot with a rear lane, MR6 allows about 4 units on a 50 × 122 ft lot (low-rise apartment); about 10 units on a 66 × 122 ft lot (low-rise apartment). These figures come from running BuildHere’s engine on each lot size with the Surrey rules for this zone.
Most units by lot size
| Lot (with lane) | Most units | Building form | Max floor area |
|---|---|---|---|
| 33 × 122 ft4,026 sq ft | None outright | – | – |
| 50 × 122 ft6,100 sq ft | About 4 units | Low-rise apartment (4 storeys) | 3,722 sq ft |
| 66 × 122 ft8,052 sq ft | About 10 units | Low-rise apartment (4 storeys) | 9,326 sq ft |
Building options on a 50 × 122 ft lot
| Option | Status | Units | Max floor area |
|---|---|---|---|
| Low-rise apartment (4 storeys) | Allowed | About 4 | 3,722 sq ft |
| Low-rise apartment (4 storeys), with bonus density | Allowed | About 4 | 3,722 sq ft |
Size limits for low-rise apartment on a 50 × 122 ft lot
| Max floor area (FSR 0.61) | 3,722 sq ft | Surrey MR6 s.D.1, E, F.1, G.1 |
|---|---|---|
| Max height | 49.2 ft, about 4 storeys | Surrey MR6 s.D to G |
| Site coverage | 60% of site | Surrey MR6 s.D to G |
| Front setback | 14.8 ft | Surrey MR6 s.D to G |
| Side setback | 19.7 ft | Surrey MR6 s.D to G |
| Rear setback | 19.7 ft | Surrey MR6 s.D to G |
| Rough building footprint | up to 926 sq ft | Estimate, not a design |
| Parking stalls required | 6 stalls (minimum) | Surrey Part 5 Table D.1 |
Your lot will differ.
Frontage, depth, lane access, corner lots and frequent-transit areas all change the answer. Search your address for a report on the real lot in Surrey.
Common questions
How many units can I build in MR6 zoning in Surrey?
With a rear lane and outside a frequent-transit area, MR6 allows about 4 units on a 50 × 122 ft lot (low-rise apartment); about 10 units on a 66 × 122 ft lot (low-rise apartment). Smaller lots fall short of the zone's minimums. Your own lot's frontage, depth and location change the result.
What is FSR?
Floor space ratio (FSR) is a building’s total floor area divided by the lot area. An FSR of 1.0 on a 4,026 sq ft lot allows about 4,026 sq ft of floor area across all storeys. Some bylaws, such as Burnaby’s R1, set no FSR at all; there BuildHere shows an effective FSR worked out from the height, setback and lot coverage limits.
Where do these MR6 rules come from?
From City of Surrey Zoning By-law, 1993, No. 12000: Parts 20 (MR1), 21 (MR2), 21A (MR3), 22 (MR4), 23 (MR6) and 24 (RM-70), Consolidated to 21 September 2026 (By-law 22120) consolidation (rules approved 2026-10-19). Preliminary screening only. Verify with the City of Surrey.